- Recent
- Popular
- Answered
- Unanswered
0helpful
1answer
Blocked jets clogged with dust or dirt, blocked injector need a clean / service
Read full answer
4/8/2024 1:31:40 PM ••32 views • 0 helpful votes
0helpful
1answer
This is interesting because in 2012 a query was made regarding this aiir condition and even then no one could find it or even the company. That said, the Canandian retail chain "The Brick" purportedly once sold such. They currently also sell a 12,000 BTU portable air conditioner. It is very challenging to even find an image of anything called the Stashoff Portable Aircon. If somehow you indeed have this item and find yourself missing a hose as did a person in 2012, I think you are going to have to take measurements and try to find a 3rd party hose.
Read full answer
5/13/2024 2:41:49 AM ••18 views • 0 helpful votes
0helpful
1answer
All questions need 'make model (what it is) as the first 3 words and in that order please.Extracting the model from the jumble of words and numbers produces thishttps://www.google.com/search?q=zw2880+D2-75%2F1.4+RevYour search query for this is simply;make model replacement capacitorThe specifications should be on the old one if it is still there...
Read full answer
6/5/2024 2:06:23 PM ••14 views • 0 helpful votes
0helpful
1answer
Either the drain in the bottom or the unit is blocked with Bio Film Mass (AKA 'gunk') or the pipe outside is blocked. It is a very simple system. It is a known issue and the maker cover itThe most common reason is that the drain tube, which is an insulated tube on the rear side of the indoor unit is cracked, clogged, or not at a continuous downward pitch. Check the state of the drain hose, and any extensions that were attached to it. Ensure that it can drain freely by conducting a drainage test.
My Pioneer Wall-Mounted Mini Split is Leaking Water
Pioneer Mini Splithttps://help.pioneerminisplit.com > en-US > my-pioneer-...
Read full answer
5/16/2024 12:45:55 AM ••17 views • 0 helpful votes
1helpful
1answer
To fix code E5 on a Bonaire evaporative cooler, which typically indicates a water management issue, try the following steps:
- Check the water level in the unit to ensure it's sufficient.
- Inspect the water inlet valve for blockages or malfunction and clean or replace as necessary.
- Clean the filter and pump to ensure proper water flow.
- Reset the unit by turning it off at the power source, waiting a minute, and turning it back on.
If the problem persists, consult the user manual or contact Bonaire customer support for further assistance.
Read full answer
3/10/2024 4:04:57 AM ••56 views • 1 helpful votes
0helpful
1answer
https://www.manualslib.com/manual/704344/Arctic-King-Window-Wall-Type-Room-Air-Conditioner.html
Read full answer
5/19/2024 3:07:34 PM ••16 views • 0 helpful votes
0helpful
1answer
Question edited for a lot more clarity, full 'make model (what it is)'.Full Parts Schematics are here. It looks like it does, or the case comes off and leaves everything on the base. Click the Arrow on the right.https://www.appliancefactoryparts.com/airconditioners/fedders/a2d24e7dg-d.htmlSimilar Unit disassembly that may help whatever it is you intend to do??..
Read full answer
5/9/2024 4:45:24 AM ••17 views • 0 helpful votes
0helpful
1answer
Parts suppliers in the link. Ot if you take the old one off, a metal fabrication workshop could make you a new one.https://www.google.com/search?q=Newlec+NLSH+24AN+storage+heater+partsThey still sell them and they all look the same.https://www.hwelectric.co.uk/newlec.php..
Read full answer
3/29/2024 5:11:18 PM ••31 views • 0 helpful votes
0helpful
1answer
Impossible to answer without 'make model (what is is)'. That should be the first 3 words in every question.
Troubleshooting ' Air Conditioning and Refrigeration
Daikinhttps://www.daikin.com > products > ac > services > trou...If the operation lamp still flashes, disconnect the power plug from the outlet or turn the breaker off and contact the place of purchase. Are there any objects ...
Air Conditioner Light Blinking Problem Solving Techniques ...
absolutesolutions.com.sghttps://www.absolutesolutions.com.sg > news > why-my...Nonetheless, a blinking light is mostly an indicator that your unit needs to be serviced if you expect it to not only service you back but to do so efficiently.
Have model ras-17ekv-ul green operation light and orange
JustAnswerhttps://www.justanswer.com > HVAC QuestionsJun 25, 2020 - You may have had a power failure. Try resetting the breaker. Flashing green indicates power loss. Flashing orange for outdoor circuit board ...1 answer · Top answer: It shouldn't as long as the unit is off when you kill power...
Read full answer
3/18/2024 11:01:20 AM ••34 views • 0 helpful votes
0helpful
1answer
bad compressor
Read full answer
3/17/2024 1:25:15 AM ••34 views • 0 helpful votes
0helpful
1answer
Obviously window and wall a/c units are not tradable, in spite of the fact that I don't have the subtleties of the distinction.Alter Window units are intended to exploit the way that a window is a flimsy segment; vents outwardly of the a/c case can be near within part of the a/c unit, yet be outside (where they must be). This might permit the window units to be less expensive. Interestingly, a wall can be 6" thick or more; wall units should have all vents near the rear of the unit. BTW I generally felt that the vents in the side of a window unit were for admission of air at encompassing temperature to then be coordinated through the condenser curl at the back plane of the unit to be depleted out the back (presently more sweltering than surrounding), however as a matter of fact a portion of the side vent region may likewise be utilized for ousting air which cools engines. It may be the case that in a window unit the venting on one side is committed to admission of air for the condenser loop and the venting on the opposite side is for exhaust. This would forestall the hot exhaust air being pulled in the admission for the condenser cooling air.Window ACs versus Through-the-Wall ACsIt's not difficult to think about window and through wall ACs, since they're comparative in cooling limit and size, yet through-the-wall units will generally be somewhat more productive in light of the fact that they make an impermeable seal in the room.The significant contrasts between these ACs include establishment and venting. Window ACs fit through a window and don't need long-lasting establishment, while through wall ACs are really incorporated into the wall - making them well known in rooms without windows or for individuals who like to let their windows be.Wall forced air systems normally just vent warm air through the rear of the unit, while window ACs vent from the sides and back. Hence, window and through wall models are not exchangeable (regardless of whether they're a similar size). Generally speaking, in the event that a window unit vents out its side, the wall will obstruct the vents and cause overheating. Select window AC models can be introduced through a wall, however provided that they have a slide-out case wall sleeve. Peruse more on wall sleeves.
Read full answer
3/25/2024 1:02:42 AM ••26 views • 0 helpful votes
1helpful
1answer
Question edited for clarity.Bad luck, and the company will get some negative advertising by your question as this will end up indexed by Google.There are some vendors for spare parts. If it is just a multicore wire that was damaged, that is available by the foot.https://www.google.com/search?q=human+touch+ZERO+GRAVITY+G+2+remote+replacement..
Read full answer
3/5/2024 11:35:05 AM ••37 views • 1 helpful votes
1helpful
2answers
Here are the steps you might want to follow:Setting the Draining Cycle Times (Dump Interval): This setting controls how often the unit dumps the water. You can adjust this setting to reduce the frequency of water dumping.Setting the Drain off Delay Time (Dump Delay): This setting controls the delay time before the unit starts to dump the water after it has been turned off.If adjusting these settings doesn't work, there could be other issues with your unit. For example, a continuous water dumping problem could be due to a faulty dump valve or a problem with the float valve.
Read full answer
3/7/2024 11:34:49 AM ••33 views • 1 helpful votes
0helpful
1answer
there is no rest. Item used 24VAC from hvac to power it . If 24VAC from hvac is missing thermostat will not power up and hvac will not work. You will need to call for service.
Read full answer
3/15/2024 2:03:38 PM ••27 views • 0 helpful votes
1helpful
1answer
Greetings from Mississauga, Ontario!If it is construction Styrofoam it is a good insulator. Fill as best you can between the studwork and use spray foam to fill gaps. Then cover with drywall. Floor insulation and underfloor heating is a good way to keep the chill out.Frozen pipes and only caused by cold and draughts.Stay warm...
Read full answer
2/29/2024 5:57:46 PM ••35 views • 1 helpful votes
0helpful
1answer
It is not the fan motor. it is most likely the computer board. can you take a picture of the unit and send it to me? text it to 3153418739
Read full answer
3/5/2024 7:23:35 PM ••31 views • 0 helpful votes
0helpful
1answer
Question edited for clarity.Stuck blend door actuators, stuck thermostat, or this, airlocks.https://www.fixya.com/support/r29872074-vehicle_cooling_system_no_heat..
Read full answer
3/19/2024 8:25:07 PM ••23 views • 0 helpful votes
0helpful
1answer
Check the breaker. They have a 5 year warranty.
Warranty - Franke HT-400 Installation Manual [Page 12]
ManualsLibhttps://www.manualslib.com > ... > Installation manualuse, for a period of ?ve (5) years from the date of purchase. This warranty will be honored provided the HT-400. Heating Tank has been installed and ...
Read full answer
2/24/2024 11:49:55 PM ••35 views • 0 helpful votes
0helpful
1answer
From the owner's manual:
- Open front thermostat door and open battery compartment door.
- Install two new "AA" alkaline batteries. Locate the positive (+) ends of the batteries and match them with the positive (+) terminals located in the battery compartment. Close battery compartment.
Going by the photo of the thermostat, it looks like there's a finger recess or latch on the right side of the thermostat that you pull on to swing the front open. If there is unexpected behavior from the thermostat after replacing the battery, see the reset procedure in the installation section of the manual.Link to manual: https://thermostat.guide/proselect/proselect-pstsl21p52-2h-1c-programmable-thermostat-installation-guide/#battery-replacement
Read full answer
2/24/2024 6:46:07 PM ••34 views • 0 helpful votes
0helpful
1answer
o reset your Homebasix Oscillating Parabolic Heater, follow these steps:Unplug the heater from the power source.Locate the Manual Reset Button on the heater. It's usually a small button or switch.Use a fireproof, non-conductive rod (such as a wooden stick or plastic tool) to press the Manual Reset Button.After resetting, plug the heater back in and check if it functions properly.Remember to ensure that there are no flammable objects within 3 feet of the heater and that it is placed on a stable surface.
Read full answer
4/6/2024 10:18:56 AM ••17 views • 0 helpful votes
- Prev
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- Next